Praxis Works M30 386 Evo Road Bottom Bracket
Specifically designed for use when installing a Praxis Works M30 road crankset to a 386EVO frame, the Praxis Works M30 386 Evo Road Bottom Bracket is the perfect solution. This quality component is only compatible with Praxis M30 cranks and 386EVO road frames with a width of 86.5mm and a diameter of 46mm, and should not be used with other 30mm cranks. The bottom bracket uses 30mm bearings on the drive side for added stiffness and durability, and uses 28mm bearings on the non-drive side.
- For Praxis Works M30 spindle based cranks only. NOT for other 30mm cranks
- Use only in frames with 386EVO Road bottom bracket shells
- Steel Bearings | 30mm Drive bearing /28mm Non-Drive bearing
- 386EVO Road is 86.5mm width and 46mm diameter
Forgotten Your Password?
Please enter your registered email address below and we'll send you an email explaining the next step.
Select a store
Select the store you visit most frequently below and their stock information will show on product pages.