Wolf Tooth Components Road Link Rear Derailleur Hanger
The Road Link Rear Derailleur Hanger from Wolf Tooth Components allows riders to offset the position of their 10 or 11-speed rear derailleur to make it possible to run a wide-range cassette as large as 11-40t.
Perfect for riders who want an ultra-large gear for super-steep climbs, the Road Link moves the derailleur to an optimal location for these wider range cassettes. the RoadLink moves Shimano 10 and 11-speed rear derailleurs to an optimal position for wide-range cassettes. What the RoadLink does not do is expand your derailleur's capacity, as that is a function of the derailleur mechanics.
The derailleur capacity is a specified number published by the groupset manufacturer. Please consult the relevant tech page for exact capacity.
Road Link General compatibility:
10s Cassette Compatibility:
- 11-32: Not Required (medium cage rear derailleur works)
- 11-34: Single or Double Chainring
- 11-36: Single or Double Chainring
- 11-40: Single or Double Chainring (front rings can be no more than 14 teeth different e.g. 48-34)
- 11-42: Not Supported
11s Cassette Compatibility:
- 11-32: Not Required (medium cage rear derailleur works)
- 11-36: Single or Double Chainring
- 11-40: Single or Double Chainring (front rings can be no more than 14 teeth different e.g. 48-34)
- 11-42: Not Supported
Features
- The RoadLink is compatible with 10 and 11-speed road derailleurs and shifters. While optimised for Shimano road derailleur geometry, it also works very well with 9-speed road groups, all SRAM groups, and Campagnolo derailleurs. With Campagnolo, it works best with cassettes up to 11-36t
- The RoadLink mounts only to standard derailleur hangers
- Double chainrings are only supported with GS (medium cage) rear derailleurs
- Triple chainrings are not supported (medium cage rear derailleurs cannot accommodate that big of a change)
- Direct Mount-native frames are not supported
- Due to the lack of a clutch mechanism on Shimano road derailleurs, secondary chain retention (front derailleur or chain device) may be needed, especially for rough- or off-road use
- Due to variations in derailleur hanger geometry, chainstay length, chainring size, B-screw adjustment, and suspension configuration, individual results will vary
- Conceived and designed as a collaboration between Wolf Tooth and Lindaret
- Manufactured in the USA
- Material - 6061 aluminium with stainless steel bolt
- Colours - black
- Weight: 17 grams
Unable to display Reviews due to Privacy Settings.
Adjust your Cookie Preferences to Opt-in "YES" to "Functional Cookies".
Unable to display Q&A due to Privacy Settings.
Adjust your Cookie Preferences to Opt-in "YES" to "Functional Cookies".