Specialized S-Works Stumpjumper 29 MTB Frame
Take to the trails with enhanced speed and style aboard Specialized's latest S-Works Stumpjumper Frame. This mountain bike's aim is simple; one bike that can do everything well. Already regarded by many as the ultimate trail bike, this 29" variant utilises a FACT 11m full carbon construction to ensure immense stiffness and a low overall weight.
A SWAT Integration Door Compartment provides a simple and neat storage solution, while the replaceable derailleur hanger reduces the risk of damage in the event of a crash.
Featuring a 12x148mm boost axle spacing, the Stumpjumper has adequate clearance for high volume tyres without any adverse effect on the chainline, while the threaded bottom bracket offers the reliable, creak-free performance every mountain biker craves. Optimised for trail use, the bike operates around 140mm of rear wheel travel.
Utilising a Fox Float DPX2 Shock with a Kashima Coat, the Stumpjumper will absorb trail chatter and big impacts with equal efficiency. With a 3-position adjustment, the shock provides options for every situation; a flick of the switch changing the ride characteristics depending on whether you're climbing, descending or spinning along open singletrack.
|Frame||FACT 11m, full carbon chassis and rear end, asymmetrical design, 29 Trail Geometry, SWAT™ Door integration, threaded bottom bracket, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 140mm of travel|
|Rear Shock||Fox Float DPX2 Factory, Rx Trail Tune, EVOL Air sleeve, Kashima Coat, 3-position adjustment with Open Mode adjustment, 210x50mm|
|Seat Binder||Specialized bolt-type, alloy, 38.6mm|
Specialized S-Works Stumpjumper 29 MTB Frame Sizing
Forgotten Your Password?
Please enter your registered email address below and we'll send you an email explaining the next step.