CeramicSpeed PF4130 Press Fit Bearings - BB86/30mm
Compatible with BB86 frames and cranks with a 30mm spindle such as 386Evo, Rotor 30mm, these CeramicSpeed PF4130 Press Fit Bearings will provide low friction, energy saving pedalling by using CeramicSpeed’s inimitable bearings and bearing races. These give a typical saving of 75% in terms of drag reduction when compared to more conventional bottom brackets. Not only that, but they last at least three times as long as normal bearings, so there are both performance and longevity benefits. CeramicSpeed’s commitment to reducing drivetrain friction has even led them to develop their own low viscosity grease to maximise the energy saving potential.
- For fitting 30mm spindle cranks to BB86 frames
- Drag of only 0.3-0.4 watts per set
- 75% drag reduction compared to standard bottom brackets and bearings
- 15% harder wearing and three times as long lasting than other bearings
- Low viscosity grease
- In the box:
- Two cups with bearings installed
- Two 1mm spacers
- Two 0.5mm spacers
- Two dust covers
- Wave washer
- Plastic cable protector
- 10ml syringe All Round Grease
- Sticker sheet
Forgotten Your Password?
Please enter your registered email address below and we'll send you an email explaining the next step.
Select a store
Select the store you visit most frequently below and their stock information will show on product pages.