ENVE SES 3.4 Chris King Disc Clincher Wheelset

ENVE SES 3.4 Chris King Disc Clincher Wheelset

The ENVE SES 3.4 Chris King Disc Clincher Wheelset fuses exceptional responsiveness with aerodynamic refinement to produce a fast, dependable performance across any parcours. The full carbon rims are light and laterally stiff, promoting an urgent feeling when the pedals are stomped up the steepest climbs. These rims also feature wind-tunnel tuned front and rear-specific profiles and depths, enabling them to slice through the air when the pace is high during solo breaks or on the chaingang through and off. Additionally, the rim spoke holes are moulded instead of drilled, allowing the carbon strands to run uninterruptedly throughout the structure, further increasing stiffness and strength.

Finished with a refined raw carbon effect, the rims have broad, 21mm inner measurements that help tubeless-ready or standard clincher tyres sit with improved cross-sectional profiles and heightened sidewall support. These improved tyre profiles result in lower aerodynamic drag, reduced rolling resistance and extra comfort over rutted road surfaces.

The rims rotate around Chris King R45 hubs with super-smooth bearings, aerodynamic shell shaping and stunning build quality. Linking the build are aero-profiled Sapim CX-Ray spokes laced in reliable 2-cross patterns. 

Highlights

• ENVE’s most popular wheelset flies up the climbs but offers an aero edge at faster riding speeds
• Full carbon rims are light, torsionally stiff and feature excellent impact resistance
• Moulded spoke holes, as opposed to drilled, increase the rigidity of the rims
• A paint-free rim finish lowers weight and provides a beautiful handmade shine
• The wind tunnel tuned rims feature front and rear-specific profiles and depths in line with specific airflow interaction at the front and rear of the bike
• A hooked internal rim interface is compatible with tubeless-ready or standard clincher tyres
• A 21mm internal rim width better supports tyres, allowing them to perform with a blend of extra comfort, lower rolling resistance and cornering traction
• The rims work optimally from an aerodynamic standpoint with 25mm wide tyres
• Chris King R45 hubs are robust, have aerodynamic profiling and integrate super-smooth bearings
• The rear hub’s 45-tooth RingDrive freehub lowers drag while coasting and provides near-instant engagement
• The Center Lock interface provides solid disc rotor mounting
• Strong and aero profiled Sapim CX-Ray spokes are laced in reliable two-cross patterns

Included

• 2x tubeless valve stems
• 1x tubeless roll of tape (good for taping 3 wheels)
• 2x tubeless pressure relief valve stem nuts
• 2x Alcohol Swabs for Rim Cleaning Before Taping
• Valve extenders 
• Accessory bag
• Wheel manual
• Wheelbuild card
• Please note: Rotor lock rings are not included and should be sourced through the component manufacturer