Garmin Vector S Power Meter Road Keo Single-sided System - Standard
Take your training to the next level with the Garmin Vector S Power Meter Road Keo Single-sided System - Standard. Measuring both your cadence and power, you'll be able to fully tailor you training with complete precision and monitor your improvements. This multi-functional system also measures cadence and pairs seamlessly and wirelessly with ANT+ units including Garmin Forerunner and Edge computers.
Your own personal coach with you for every pedal revolution, the Vector S offers a vast range of data, allowing you to dial in your training or race efforts perfectly, meaning you can get the most out of your riding.
Measuring power has never been more precise, with real-time data delivered straight through to your device. A versatile power meter, the Vector S can be installed in minutes, at home, with minimal tools, and is compatible with the majority of crank arms, including carbon fibre variants. A simple, CR 2032 battery can easily replaced and provides over 175 hours of active cycling time.
Designed to work with Look Keo cleats, this system tips the scales at a mere 337.8 grams, putting it in line with many standard, non-power meter based, pedals.
The Vector S takes it's power data from the left pedal but for even more in-depth data, an upgrade package is available to purchase that provides a dual-sensing system, so left and right leg power readings can be obtained and well as information regarding balance, pedal smoothness and torque effectiveness.
Please note This Garmin Vector S Power Meter is the standard (12-15 mm) size, based on the crank arm thickness. It can fit crank arms up to 44 mm in width.
Included: One power pedal, one normal pedal, one standard pod and cleats with 6 degrees of float, plus an ANT+ USB stick for updating firmware.
Computer compatibility: Works with any power compatible ANT+ head unit but is optimised for Garmin Edge 1000, 510 and 810.
- New pedal based power meter
- Single sided system, measures power from the left pedal
- Data recorded through the included pedal pod
- Works wirelessly with ANT computers
- Installed within minutes with minimal tools
- Can be swapped seamlessly between bikes
- 175 hours of ride time from the easily replaceable CR 2032 battery
- Upgrade possibilities to a dual-sensing system, measuring power and data from both the left and right pedals
Forgotten Your Password?
Please enter your registered email address below and we'll send you an email explaining the next step.