Cannondale SuperSlice EVO LAB71 A/M Frameset

£6,000.00

Delivery

Select size to see delivery options

Collect in Store

Cycle to Work – Save up to 42%

Spread the cost of your new bike and save up to 42% through the Cycle to Work scheme. We accept all major providers including Cyclescheme, Green Commute Initiative, Bike2Work and more. Check with your employer for eligibility.

Free Delivery on all bikes

Complimentary standard delivery on all bikes to UK mainland addresses. Orders typically arrive within 2–5 working days. A signature is required on delivery. When you receive your bike all you'll need to do is unpack it, attach your pedals, turn the handlebars and ride.

Premier Delivery

Upgrade to Premier Delivery at checkout for a nominated day, extended assembly and in-home handover by a trained technician. Available on eligible bikes across UK mainland.

Built, checked, tuned & tested

All our bikes are fully built, checked, tuned and tested by our Cytech qualified mechanics and then securely packaged, ready for delivery. All you have to do is add the pedals (if included), attach the handlebars to the stem and tighten them following the included detailed instructions or by watching our video and using the provided FREE tools. Visit our Bike Assembly page to see how you assemble your new bike once you receive it.

All bikes collected from our shop, are built, tested and ready to ride.

Pedals & accessories

Please note, occasionally, manufacturers may change the specification without notice. Bicycles do not come with pedals unless otherwise specified. Bikes ordered for delivery will not arrive with the pedals installed, please refer to the owners manual and pedal installation guides provided for guidance. We do not install accessories to bikes, including mudguards. Bikes ordered for delivery that have tubeless compatible tyres and rims will arrive with inner tubes installed or with tubeless valves installed, this will be brand dependent. Sealant is available to be purchased separately.

If you require any assistance please contact our Customer Care team

You May Also Need

Argon 18
E-119 Tri+ Disc Triathlon Frameset
£3,999.00
£6,000.00
Cervelo
P-Series Triathlon Frameset 2025
£1,805.00
£3,000.00
Cervelo
P-Series Frameset 2026
£2,375.00
£3,000.00

Product Details

Cannondale SuperSlice EVO LAB71 A/M Frameset

The Cannondale SuperSlice EVO LAB71 A/M Frameset is the distillation of Cannondale's aero expertise, honed to deliver the ultimate machine to cheat the wind and get to the line the fastest with the least amount of effort possible. The Gen 3 frame isn't just fast, it's light too, with the Ultralight Series 0 Carbon construction delivering a low weight without sacrificing the pedalling efficiency needed to get up to and hold high speeds.

The deep aero-section SuperSlice Gen 3 Delta Steerer fork slices through the air with ruthless efficiency. Meanwhile, the SystemBar TT base and Vision MonoRiser aerobar system allows for optimal aero riding positions.

Highlights:

SuperSlice LAB71 Gen 3 frame - Ultralight Series 0 Carbon construction
Deep aero-section SuperSlice Gen 3 Delta Steerer fork
SystemBar TT integrated full carbon base bar
Vision MonoRiser with JS bend carbon extensions
SuperSlice Gen 3 carbon seatpost with wide range clamp

Features

LAB71 SuperSlice, Gen 3, Ultralight Series 0 Carbon, flat mount disc, integrated seat binder, UDH
Fork: LAB71 SuperSlice, Gen 3, Ultralight Series 0 Carbon, integrated crown race, flat mount disc, internal routing, 1-1/8" Delta steerer, 50mm offset
Axles: Front - 12x100mm thru-axle; Rear - 12x142 thru-axle
Headset: Integrated, 1-1/8"
Bottom Bracket type: BSA 68mm threaded
Handlebars: Cannondale SystemBar TT Carbon Base Bar (380mm width)
TT Bar: Vision single pole, mono-link TFA EVO riser with JS bend carbon extensions (100mm pad stack range in 5mm increments, 119mm fore/aft pad reach in 7.5mm increments)
Seatpost: SuperSlice Gen 3, Carbon, wide range rail clamp (45mm of fore-aft adjustment), 350mm

Highlights

SuperSlice LAB71 Gen 3 frame - Ultralight Series 0 Carbon construction
Deep aero-section SuperSlice Gen 3 Delta Steerer fork
SystemBar TT integrated full carbon base bar
Vision MonoRiser with JS bend carbon extensions
SuperSlice Gen 3 carbon seatpost with wide range clamp

Specifications

Model: SuperSlice EVO LAB71 A/M Frameset
Bottom Bracket Standard: BSA
Brakes [Kind]: Hydraulic Disc
Discipline Compatibility: Triathlon, TT
E-Bike: No
Family: SuperSlice
Fork [Axle Diameter]: 12 mm
Fork [Axle Type]: Thru-Axle
Fork [Brake Type]: Disc
Fork [Material]: Carbon
Fork [Rake]: 50 mm
Fork [Wheel Size]: 700c
Frame [Hanger Standard]: UDH
Frame [Material]: Carbon
Frameset: Yes
Gender: Unisex
Handlebar [Kind]: Aero
Handlebar [Maker]: Cannondale
Handlebar [Material]: Carbon
Handlebar [Width]: 380 mm
Headset [SHIS]: IS
Seatpost [Kind]: Aero
Seatpost [Length]: 350 mm
Seatpost [Maker]: Cannondale
Seatpost [Material]: Carbon
Sub Family: Superslice EVO
Suspension Configuration: Rigid
Wheels [Configuration]: Front+Rear
Product code: 2007048 / 54293386363226

Size Guide

Size	XS	S	M	L
A. Seat Tube (ctr-top - mm)	440	490	551	585
B. Effective Top Tube (mm)	478	497	517	536
C. Head Tube Angle (°)	71.5	71.5	71.5	71.5
D. Seat Angle Range (°)	74-77	74-77	74-77	74-77
E. Standover (mm)	388	402	417	431
F. Head Tube Length (mm)	50	77	106	133
G. Wheelbase (mm)	979	1002	1026	1049
I. Chainstay Length (mm)	415	415	415	415
L. Fork Rake	50	50	50	50
N. Stack (mm)	461	487	514	540
O. Reach (mm)	388	402	417	431
Pad Stack (min Q to max Q' mm)	545 - 645	571 - 671	598 - 698	624 - 724
Pad Reach (min R to max R' mm)	348 - 46.7	362 - 481	377 - 496	391 - 510