New To Sigma Sports?
£10 off £100* - code SIGNUP10

Dynaplug Air Tubeless MTB Tyre Repair and Inflation Kit

★★★★★ ★★★★★
(0)
£51.00
MSP £60.00 Save 15%
Dynaplug
Air Tubeless MTB Tyre Repair and Inflation Kit

We're sorry, but unfortunately, we're unable to ship this item to your country

Product ID: 1017721

When riding tubeless on the trails and a nasty puncture threatens to spoil your ride, get back on your bike faster than ever with the Air Tubeless MTB Tyre Repair and Inflation Kit from Dynaplug.

Use this tool to insert an innovative tyre plug and while inserted, discharge a CO2 cartridge (sold separately) to reinflate before removing the tool to leave the plug bonded to your tyre and creating a superb seal.

Dynaplug Air Tubeless MTB Tyre Repair and Inflation Kit

The Dynaplug Air Tubeless MTB Tyre Repair and Inflation Kit is an all-in-one solution to fixing your punctured tubeless tyre and reinflating it at the same time. The fastest way to get back on the trails, simply pop the tool into the hole that your sealant couldn't plug, and while inserted, discharge a CO2 cartridge (sold separately) to reinflate. Remove the tool leaving a soft nose standard plug behind, and allow the sealant-friendly viscoelastic impregnated rubber to seal the hole securely.

The tool is made long enough for the CO2 vents to pass through the tread of thicker MTB tyres to allow for re-inflation. There's also a handy inflation hose included if you'd prefer to reinflate through your valve stem.

Includes

  • Precision machined air valve body
  • Stainless steel repair nozzle/insertion tube
  • 4 x soft nose standard plugs
  • Air hose for CO2 inflation through your valve stem
  • Storage pouch

Features

  • All in one tubeless tyre repair and reinflation solution
  • Fast and easy to use
  • Directions: Firmly insert tool into puncture hole, if required discharge a CO2 cartridge (sold separately) to reinflate, then extract the tool depositing the repair plug in the hole
  • Sealant-friendy repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre
  • No need to remove the tyre, no messy glues or solvents, just plug and ride
  • Long MTB inserter ensures CO2 vents penetrate threaded tyre (not recommended for tyres under 35mm thick)
  • Plug tail can be trimmed to 4mm long once inserted
  • Made in the USA


Close menu