New To Sigma Sports?
£10 off £100* - code SIGNUP10

Enduro 6806 Zero Ceramic Bearing

★★★★★ ★★★★★
(0)
£60.00
Enduro
6806 Zero Ceramic Bearing

We're sorry, but unfortunately, we're unable to ship this item to your country

Product ID: 168132

Looking to spin smoother? Have less resistance and ultimately go faster? Well the Enduro 6806 Zero Ceramic Bearing is what you need.

To be used on either the hubs or bottom bracket, the ceramic bearings are of high Grade 3 quality for assured durability and performance.

Enduro 6806 Zero Ceramic Bearing

Looking to spin smoother? Have less resistance and ultimately go faster? Well the Enduro 6806 Zero Ceramic Bearing is what you need. To be used on either the hubs or bottom bracket, the ceramic bearings are of high Grade 3 quality for assured durability and performance.

The ceramic bearing balls and steel races are made up of ceramic Silicon Nitride-Si3n4 and the races are further treated with black oxide.

Finished off with a ground toa mirror treatment that reduces wear and prevents corrosion. Performance-wise this allows for practically perfect efficiency and tolerances.

Coming onto the ABEC scale with a rating of 5. The ABEC system relates to the tolerances of the bearings. There are five levels from largest to smallest tolerances, 1, 3, 5, 7, and 9. The higher the ABEC number the better precision, efficiency and the greater speed capabilities. This does not guarantee components spin faster though.

The Grade rating is based on the manufacturing quality of the bearing balls, this ultimately results in it's geometric tolerances. Grades range from 2000 to 3. The lower the number the higher the precision. Enduro use Grade 3 for the Zero, making them the highest quality bearing balls.

Keeping the unit together are VV seals. These comprise of two NBR 70 rubber seals with a non-contact seal, which rides in a matching groove machined into the bearing resulting in no drag or friction.

Kyodo Yushi PS-2 is a high quality grease that is made up of a protective interface that is applied between the ceramic balls and metal races. It has been used due to it’s high speed make up and low rolling resistance.

For a smaller ceramic bearing the Enduro 6802 Zero Ceramic Bearing would be more suitable.

Please note: This is a single bearing (not sold as a pair).

Features

  • Single Enduro 6806 Zero Ceramic Bearing
  • Recommended use: hubs or bottom brackets
  • Grade 3 ceramic bearings (ceramic Silicon Nitride-Si3n4)
  • Highly durable
  • Races: steel treated with black oxide
  • Finish: ground toa mirror treatment
  • ABEC rating: 5
  • VV seals: two NBR 70 rubber seals with a non-contact seal
  • Grease: Kyodo Yushi PS-2
  • Dimensions: 30 mm x 42 mm x 7 mm
  • Weight: 20.19 g


Close menu