Mavic Comete Pro Carbon SL UST Disc Centre Lock Wheelset 2018

Mavic Comete Pro Carbon SL UST 12mm Disc Centre Lock Wheelset 2018

If you're looking to put in your best performances then the Mavic Comete Pro Carbon SL UST Disc Centre Lock Wheelset 2018 will reduce drag and increase crosswind stability for excellent aerodynamic efficiency and speed.

The NACA rim profile features progressive aerodynamic technology to give low drag and increased stability in crosswinds, comparable to that of shallower rims. The 64mm rim depth has been optimised for 25mm tyres resulting in smooth integration between the tyre and the rim for a wide, rounded design. The profile of this full carbon rim offers enhanced power transfer so all your power is going into the pedal stroke. To improve things further, the UST tubeless design reduces rolling resistance and increases efficiency, allowing for excellent levels of traction and control whilst remaining lightweight.

24 spokes to both front and rear allow for the perfect brake torque distribution and are optimised for disc brakes. Isopulse technology ensures the optimum energy transfer and the spokes are laced radially on the drive side and crossed 2 on the non-drive side for improved spoke tension balance between left and right flanges.

The Instant Drive 360 freewheel is lightweight with fast engagement. Friction is reduced by the large contactless rubber seal. To complete these wheels are the Yksion Pro UST tyres, a great tyre for fast riding. Weighing a mere 260 grams each, you can be sure you are getting the optimum balance of weight, rolling resistance and puncture resistance.

Includes:

• Comete Pro Carbon SL UST Disc Centre Lock Wheelset 2018 with Yksion Pro UST tyres
• Front 12mm adapters
• Rear 12x142mm adapters for Instant Drive 360
• Mavic tyre sealant (rear wheel)
• Tubeless rim tape
• Multifunction adjustment wrench
• Specific disc bolts
• UST valve and accessories
• User guide

Please note: The manufacturer does not recommend using latex inner tubes with carbon clincher wheels. Using latex tubes may void your warranty. This wheelset is shipped with 12 x 142mm thru-end caps as standard. In order to make it QR compatible, part numbers V25108 and V26803 are required as well as skewers M40351 and M40350.