Garmin Vector 2 Power Meter Road Keo Dual Pedal System - Large 15-18mm
Measure your power to a greater accuracy and take full control of your riding with the Garmin Vector 2 Power Meter Road Keo Dual Pedal System. Using Garmin’s immense knowledge within the cycling industry and power market, these pedals weigh an impressive 179g each. Don’t be fooled by their minimal weight - they sure do pack a punch when it comes to features.
The difference between crank arm based power meters and pedal based power meters is clear; pedal based power meters measure through the pedal but display how and where the power is produced. For example: if you have an imbalance in your left leg, or you’re pushing too hard through your right arch, then you can take an in-depth look after your ride and seek to correct the problem.
Not only measuring power but also cadence, these pedals are perfect on the run-up to an event or your next race. With proper training, you can understand how much power you can put out and for how long, ensuring you don’t blow up in the first 10 miles and then have nothing left in the tank for the remainder of your ride.
The durability of the Vector 2 is also incomparable to others, with a minimum of 175 hours of riding time before having to replace the battery. Impressive for a system that uses ANT+ technology to transmit the data instantaneously to any ANT+ compatible head unit.
The cutting-edge piezoresistive silicon strain gauges further enhance this, protecting and sealing within each Vector pedal axle, meaning they require no recalibration or adjustment after each ride.
Adding a mere 30g to your Keo-compatible carbon-bodied pedals, this system is perfect for the weight conscious, performance-oriented rider.
Includes:
- 1 x ANT+ USB stick for updating firmware
- 2 x pedals
- 2 x standard tether pods
- 2 x cleats with 6 degrees of float
Please note:
Pedal pods in this standard pack are designed for use with cranks that have 12 - 15 mm crank thickness and up to 38 mm crank width.
Features
- Dual-sensing pedal-based power meter
- Measures total power, left/right balance and cadence
- Displays cycling dynamics showing how and where power is produced
- Installs in minutes and quickly transfers between bikes
- Pedal pods include an LED light to display important setup and maintenance information
- The large pedal pods fit crank arms 15 to 18 mm thick and up to 44 mm wide
- Battery life: 175 hours
- Weight (approximate, per pedal): 156 g
- Pedal pod weight: 23 g
- Cleats and hardware weight: 38 g
- Total weight per pedal: 179 g (not including cleat and hardware)
- Battery life: minimum of 175 hours of active cycling operation via replaceable battery (2032 coin cell)
- Float: 6 degrees
- In the box: Vector 2 pedals, 2 pedal pods, cleats and hardware, Crowfoot installation tool, USB ANT+ stick and manuals
Unable to display Reviews due to Privacy Settings.
Adjust your Cookie Preferences to Opt-in "YES" to "Functional Cookies".
Unable to display Q&A due to Privacy Settings.
Adjust your Cookie Preferences to Opt-in "YES" to "Functional Cookies".