This item is no longer available to buy. View similar products.

Powertap P1S Pedals Single Power Meter Set

★★★★★ ★★★★★
(10)
£455.00
RRP £550.00 Save 17%

We're sorry, but unfortunately, we're unable to ship this item to your country

Product ID: 682119

A single sided version to PowerTap P1, the P1S Single Power Meter Pedal Set measures the power through the left pedal and doubles the value for total power.

Compatible with ANT+ and SMART Bluetooth compatible devices, allowing you to measure and record a wide range of power and pedal stroke data so you can train and race smart.

  • Included: Red, 6-degree floating cleats

PowerTap P1S Single Power Meter Pedal Set

With a conventional right pedal and a power meter incorporated left pedal, the PowerTap P1S Single Power Meter Pedal Set makes measuring power out on the road or on the turbo trainer a simple and accurate task.

Measuring the power being put through the left pedal, the system doubles the value to provide you with a total power reading.

The ingenious one-piece design easily mounts to the crank arm and does not require calibration, nor an installation angle setting.

With dual band ANT+ and Bluetooth SMART compatibility, the P1S Pedal Set is compatible with a wide variety of headsets and bike computers so you can get an accurate and consistent power read while you ride and also after your ride via third party applications like Strava.

The cleats that are included with the P1 Pedals are specifically designed for use with these pedals and offer 6˚ of float. Only Powertap specific cleats are compatible with the P1S Pedals.

One AAA lithium battery for the left pedal is enough to provide a staggering 60 hours of battery life without worrying about obscure and hard-to-find battery types.

Features

  • Measures left power only and doubles that value for total power
  • Weight: 398 grams
  • Thread Type: 9/16"
  • Cleat Interface: 3 bolt
  • Cleat: Red, 6 degree floating (included)
  • Spring Type: Adjustable Elastomer
  • Proven PowerTap accuracy
  • Release Tension: 6-20 Nm
  • Stack Height: 14mm
  • Q-Factor: 53mm (measured from crank to pedal)
  • Lean Angle: 25.5 degrees (based on 175 mm crank length, 75 mm BB drop and 147 mm Q-Factor crank)
  • Firmware Updates: Over the air
  • Connectivity: ANT+ and Bluetooth SMART
  • Battery: AAA Lithium (Use only lithium batteries with the pedal system. Alkaline batteries could damage the pedals)
  • Battery Life: 60 hours
  • No weight limit


Unable to display Reviews due to Privacy Settings.

Adjust your Cookie Preferences to Opt-in "YES" to "Functional Cookies".

Unable to display Q&A due to Privacy Settings.

Adjust your Cookie Preferences to Opt-in "YES" to "Functional Cookies".

Close menu